FLOATING Rivet Nut

Sherex has designed a HOT NEW Fastener -- the "RIV - FLOAT" a nut sert (tm) or a rivet nut with a floating internal nut. This allows for easier assembly with mis aligned panels.

Poly Handles
Polyamide (PA/33), Orange and Black are available.
Heat resistant to 150 deg C
with scres M8*32mm length or could be quick installed on panel with tapped hole bolt and nut

These are available in bulk large volume.
please give me a call if you need a print.
Thank you

NEW FROM PEM

PEM has launched a specific new product line with our Micro Pin Product.

We’d like to emphasize that the equipment that PEM acquired to produce this type of part is also capable of making micro-screws, tack pins, and other “smaller-than-you’re-used-to” parts.

Examples of a Micro Pin design
Features and Benefits
•Available in pin diameters of 1mm, 1.5mm and 2mm.
• Satisfy demanding micro positioning and alignment applications.
• Head mounts flush into panels as thin as 0.5mm.
• Chamfered end makes mating hole alignment easy.
• Can be installed automatically and into stainless steel sheets.
• Excellent corrosion resistance.

Link found in LINK section to the right on blog or below
http://www.pemnet.com/fastening_products/mpp.html

The Link to PEM catalogs online can be found to Right under Link Section.

Please give us a call 800-234-4725 or email me at poakeson@ascs.com
with any application ideas or questions you might have.

Thank you from,

Paul and all of us at Aero-Space Fasteners & Electronics.

POP PT Pull-Thru Rivets

Pull-Thru (PT) Rivets --- see LINK for Data Sheet ---
Ideal where clearance is limited
and a flush set is required on
both sides of the application.
The POP® Pull-Thru (PT) rivet is a steel countersunk blind fastener designed
to set surface flush on both sides of an application (blind side rivet protrusion
#0.4mm/.015").

During setting, the mandrel head never breaks away from the mandrel. It remains
integral with the mandrel, while extruding completely through the rivet body and
exiting into the setting tool. This unique process provides a consistent tight radial
set within the working grip range of the rivet, improves rivet tool access and
eliminates the possibility of loose mandrel heads in the application.
This innovative fastener is widely used in the electronics industry. It also lends
itself to assembly of any product where clearance is limited and protrusion of the
rivet body from application surfaces must be either minimized or eliminated.
The mandrels of the POP® Pull-Thru rivets have been color coded for easy
differentiation on the production floor.

The POP® Pull-Thru rivets are manufactured to ISO, QS and TS requirements and are
both RoHS and DFARS compliant.

Please give us a call for samples

Self Piercing Rivet Videos

For a quick visual on Henrobs offering of Self Piercing Rivets please check out the utube video link below.

short and to the point.

http://www.linkedin.com/redirect?url=http%3A%2F%2Fwww%2Eyoutube%2Ecom%2Fuser%2F18004HENROB&urlhash=6CKS

Southco Rotary Latches R4-20 &-50

The new SOUTHCO® R4-20 and R4-50 Rotary Latches provide rugged performance suitable for door and access panel applications in industrial, off-highway,construction and transportation industries. Coupled with Southco’s new AC Actuators and corresponding custom-length cables, the rotary latches completea remote access system that provides the convenience of remote actuation and the confidence of positive latch engagement. Thermoplastic for corrosion resistance,the actuators—push-button, paddle handle and T-handle—are compatible with a broad range of Southco rotary latches. This system is ideal for engine covers,tool boxes, baggage doors and other access doors. Customers have an efficient way to specify and design their optimum solution from a single source.

Tape and Gasket

For "KNOCK OUT' Pricing, and MADE IN AMERICA Product, give us a call.


We provide a FULL SERVICE OFFERING on Tape & Gasket Materials. Our Factory has complete design Specs and samples readily available, and a complete cross to competition offering for your review.


What is different with us is we can provide COMPLETE APPLICATION DESIGN Support for a new product offering. Designed to your specifications, many times, in as little as 2wks - with samples.

Research & Development: We work with our Customers. Our R&D Chemists and Technicians at the factory apply science to the most demanding pressure-sensitive adhesive applications to assure you peak performance.

Aero-Space is FACTORY DIRECT! “NO MIDDLEMAN”! Check us out on Rolls, Die-Cuts, Kiss-Cuts, and Reels.


We are Highly Specialized in: Sound Deadening material, Vibration Dampening, Insulating & Shielding Products. The product offering ranges from: Hi-Friction Urethane, Double Coated Films, Felt, Non-Skid, Silicon & High Temp, Foam, Cork, Rubber, and Vinyl. Of Special interest to many would be the vast product offering in NEOPRENE/EPDM/SBR & EPDM


Please contact us if you are in any of the following fields :
Aeronautics, Automotive, Assembly, Extrusion ( Metal & Plastics)

Door Mfg, Electronics, Electronics Enclosures, Fabrication, Glass Mfg, Metal Fabrication & Assembly, Plastics, PCB’s & PCBA’s, Window Fabrication, Wood